-
Do keep fountain bowls filled to
proper level to maintain its proper operation. It is not recommended to
leave the fountain running for several days unattended.
-
Clean with a soft cloth and change
water frequently. Depending on the temperature and evaporation, you may
see a buildup of white residue on fountain surfaces from mineral
deposits in the water. Do not use abrasive cleansers or scrub material
as you may damage the fountain surface.
-
Do use an algicide in the water to
prevent algae growth, especially in hot weather. Algea can damage the
fountain surface and will clog the pump filter causing it to overheat
and burn out.
-
Do clean the filter cover on your
pump at least twice a week. To do so, just shut off the fountain and
access the pump wiping the plastic screen over the pump gently with your
fingers and removing any leaves or debris that may have been sucked up
against the pump. You do not need to remove the pump or the cover to
clean. Restart the fountain by re-engaging the electric.
-
NEVER let the fountain run
dry.
-
DO plug your fountain into
a properly grounded junction box with a GFI receptacle only. Do not run
your fountain on an extension cord.
-
DO protect from freezing.
It is best to store concrete items in a sheltered area such as a garage
or shed. If this is not possible due to the size of your fountain, drain
all water from the fountain and leave the drain plug out. Cover the
fountain completely with a tarp or other sturdy waterproof material.
Firmly anchor the material to prevent water or snow from collecting in
your fountain. Water freezing in the bowls or the fountain will cause
cracking.
